Cyclades Marine Instruments 2.3.0 Manuale Utente

104

1. From the top menu, select Ports; from the left menu, select Physical 

Ports; from the Physical Ports form, select the ports to modify; from the 
resulting form, select the Data Buffering tab.

The system brings up the Data Buffering form. The form below shows 
both checkboxes (Enable Data Buffering and Buffer to Syslog) selected 
to reveal all the form fields:    

2. Complete the necessary fields as follows:   

Select whether the destination of the data buffer is 
Local or Remote.

Select whether the Buffering Mode is Linear 
(sequential) or Circular (non-sequential).

The maximum limit of the data buffer.

Commands the system to include a timestamp in 
the data buffering file.

Indicates the menu type for viewing the buffer. 
Select from: Show all options, No, Show data 
buffering file only, and Show without the erase 
options.

The IP address of the Syslog Server.

Facility or location ID of the Syslog Server.