Clicomm CWP-100 Manuale Utente
13
④
The changed parameter will apply only after the system restarts. Select “5:Restart” from the menu
and press ENTER button. Then the system will automatically restart with the new network
parameters.
and press ENTER button. Then the system will automatically restart with the new network
parameters.
6.2.3. Dynamic IP (DHCP) Setting
①
Follow the steps as MENU “3: System Setting” ”1: Network Setting” “3: DHCP”.
Use DHCP?
Yes No
②
Select “Yes” and press ENTER button. Then the system will automatically restart with the DHCP
mode.
6.2.4. ADSL Setting
①
Follow the steps as MENU “3: System Setting” ”1: Network Setting” “4: ADSL”.
②
You will see the figure as below once you select “4: ADSL”.
1: ADSL ID
2: ADSL Password
2: ADSL Password
3
:
Connect ADSL
③
Select “1: ADSL ID” and input the ADSL ID.
Enter ADSL ID
myid_
MODE :
MODE :
A
④
In the same way, input the ADSL password.
⑤
Select “3: Connect ADSL” and press ENTER button. Then the CWP-100 will automatically attempt
the ADSL connection.
the ADSL connection.
⑥
In case ADSL connection fails, follow the steps as MENU “5: System Restart” to reattempt the
connection.
connection.