Clicomm CWP-100 ユーザーズマニュアル

④ 

The changed parameter will apply only after the system restarts. Select “5:Restart” from the menu 
and press ENTER button. Then the system will automatically restart with the new network 
parameters. 

 

① 

Follow the steps as MENU   “3: System Setting”   ”1: Network Setting”   “3: DHCP”. 

 

② 

Select “Yes” and press ENTER button. Then the system will automatically restart with the DHCP 

mode. 

 

① 

Follow the steps as MENU   “3: System Setting”   ”1: Network Setting”   “4: ADSL”. 

② 

You will see the figure as below once you select “4: ADSL”.   

 

③ 

Select “1: ADSL ID” and input the ADSL ID. 

 
Enter ADSL ID           

 

④ 

In the same way, input the ADSL password. 

⑤ 

Select “3: Connect ADSL” and press ENTER button. Then the CWP-100 will automatically attempt 
the ADSL connection.   

⑥ 

In case ADSL connection fails, follow the steps as MENU   “5: System Restart” to reattempt the 
connection.