Chauvet Baby Accessories 3P Manuale Utente
Setup
COLORado™ 3P User Manual
11
3/17/2009 9:54 AM
COLORado™ stacked for use as a Blinder or Large Wash Flood
Interlocking connectors
provide an easy, fast
and secure method for
stacking units vertically
and horizontally
provide an easy, fast
and secure method for
stacking units vertically
and horizontally
Stacking
The COLORado™ 3 can be stacked vertically and horizontally creating a blinder or a strip light. Stack
them horizontally to increase intensity of the projection for more distant throws or to use as a blinder
effect. The strip light stacking can be used for runway lighting and cycloramas.
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller
or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The
combined number of channels required by all the fixtures on a serial data link determines the number
of fixtures the data link can support.
The COLORado
™ 3 fixtures use 12 channels (maximum) of DMX control.
Important: Fixtures on a serial data link must be daisy chained in one single line. To
comply with the EIA-485 standard no more than 32 devices should be
connected on one data link. Connecting more than 32 fixtures on one serial
data link without the use of a DMX optically isolated splitter may result in
deterioration of the digital DMX signal.
Maximum recommended serial data link distance: 500 meters (1640 ft.)
Maximum recommended number of fixtures on a serial data link: 32 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase CHAUVET certified DMX
cables directly from a dealer/distributor or construct your own cable. If you choose to create your own