Avaya Media Gateway G700 Manuale Utente
Administer Communication Manager
Issue 9.1 June 2006
187
To define the IP interface of the S8400 or S8500 processor Ethernet port
Note:
Note:
This should have already been established as a part of normal S8400, S8500, or
S8700-series Media Server installation.
S8700-series Media Server installation.
1. Type change ip-interfaces procr to open the IP Interfaces screen.
IP Interfaces Screen
2. Complete the fields as described the in
change ip-interfaces procr Page 1 of 1
IP INTERFACES
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Link: 1
Enable Ethernet Port? y
Allow H.323 Endpoints? y
Nework Region: 1
Allow H.248 Gateways? y
Gatekeeper
Priority:
5
Target socket load:
Table 10: IP interfaces field descriptions
Field
Conditions/Comments
Type
Display only. PROCR
Node name
The unique node name for the IP interface. procr is the
default node name. The node name here must already
be administered on the Node Names screen.
default node name. The node name here must already
be administered on the Node Names screen.
IP Address
The IP address (on the customer LAN) of the C-LAN.
Subnet Mask
The subnet mask associated with the IP address for this
IP interface.
For more information on IP addresses and subnetting,
see “Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504”.
IP interface.
For more information on IP addresses and subnetting,
see “Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504”.
Enable Ethernet
Port?
Port?
The Ethernet port must be enabled (y) before it can be
used. The port must be disabled (n) before changes can
be made to its attributes on this screen.
used. The port must be disabled (n) before changes can
be made to its attributes on this screen.
Network Region
The region number for this IP interface.
1 of 2