American Power Conversion 3-in-1 Wireless Mobile Router Manuale Utente
Using the Wireless Security Screen
3-3
The Wireless Security (WEP) Screen
The Wireless Security screen displays when WEP is selected.
Figure 10. The Wireless Security Screen (AP Mode - WEP)
The following table describes the fields on the WEP Wireless Security screen.
Security System
Select the desired option:
•
Disabled
•
WEP
•
WPA-PSK
The screen will change according to the current selection. The following settings are visible only if
WEP is selected.
Authentication
Normally, this should be left at the default value of Auto. If changed to Open System or Shared Key,
ensure that the wireless stations use the same setting.
Key Size
Select the desired option. Wireless stations must use the same setting.
64 Bit (10 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter at least
64 Bit (10 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter at least
the default key. For 64-bit encryption, the key size is Hex 10 chars.
128 Bit (26 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter at
128 Bit (26 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter at
least the default key. For 128-bit encryption, the key size is 26 Hex chars.
Note: Hex chars are 0~9 and A~F.
Note: Hex chars are 0~9 and A~F.
Key 1, Key 2,
Key 3, Key 4
Select the key to use as the default. The Default key is used to encrypt transmitted data; the other keys
are for decryption only.
It is necessary to enter a Key Value for the Default key. Other stations must have the same key.
Passphrase
Use this option to generate a key from a phrase, instead of entering the key value directly. Enter the
desired phrase, and click the Generate Keys button.
desired phrase, and click the Generate Keys button.