American Power Conversion 3-in-1 Wireless Mobile Router Manuale Utente

Using the Trusted Wireless Stations Screen

3-4

The following image shows the Wireless Security screen when WPA-PSK is selected.

The following table describes the fields on the Wireless Security (WPA-PSK) screen.

 

 

After clicking the Trusted Stations button on the AP Setup screen, the Trusted Wireless Stations screen displays. 

The following table describes the fields and buttons on the Trusted Wireless Stations screen.

Select the desired option:

Disabled

WEP

WPA-PSK

The screen will change according to the current selection. The following settings are visible only if 

WPA-PSK is selected.

Enter the PSK (Pre-shared key), sometimes called the Network key. Wireless clients must use the same 

key. 

The time (in seconds) that must pass before the Encryption key changes.

Select the desired encryption algorithm. Wireless stations must use the same setting.

Lists any wireless stations which are designated as Trusted. 

Lists any wireless stations detected by the access point that are not designated as Trusted.

The MAC (physical) address of the Trusted Wireless Station. Use this when adding or editing a Trusted 

Station.

Add a Trusted Wireless Station to the list (move from the Other Stations list).
Select an entry (or entries) in the Other Stations list, and click the << button. 
Enter the Address (MAC or physical address) of the wireless station, and click the Add button.

Delete a Trusted Wireless Station from the list (move to the Other Stations list).
Select an entry (or entries) in the Trusted Stations list. 
Click the >> button.

Select all of the Stations listed in the Other Stations list.

De-select any Stations currently selected in the Other Stations list.