Alvarion BREEZENET BU-DS.11 Manuale Utente

 

 

 

3-27 

♦  Set Compatibility Mode: Click to set the following parameters, which are 

unique to DS.11 version 4.0, to values that will ensure interoperability with 
DS.11 units running previous versions as well as with other IEEE 802.11 
compliant devices: 

 

Basic rate=2Mbps 

 

Short preamble = Disable (BU) 

 

Scrambling: Disable 

NOTE: 

To ensure compatibility, verify that a 128-bit WEP Key is not used. 

♦  Set High Performance Mode: The units can be configured to deliver high 

performance (high throughput) if the RSSI of all links is –80 dBm or better, 
provide that all units run SW version 4.0. Upon clicking this button, the 
following parameters will be configured to support high performance: 

 

Basic rate=11Mbps 

 

Short Preamble = Enable (only in BU) 

Trap Monitor Tab 

The Trap Monitor tab enables you to view messages received from the selected unit. 

 

When an event occurs, a trap is sent to the defined host address (the setting is 
made in the SNMP Parameters tab described on page 3-7). This window displays 
the recorded traps. 

Click Clear List to clear the display area.