Digidesign Control 24 Manuale Utente

3  

Press the PAN/SEND switch on any channel to 

exit Select Input Monitoring mode. 

On Control|24, the SWITCH ACTIVE switch 
lights to indicate Input Only mode. On-screen, 
the Track Input button lights green to indicate 
Input Only mode. 

To change the monitoring mode of all record-
enabled tracks on Control|24:

■

Press the MONITOR/Ø (Monitor/Phase) 

switch. All record-enabled tracks will toggle be-
tween Auto Input and Input Only mode. The 
MONITOR/Ø switch lights when any track is in 
Input Only mode. 

Record Modes

Pro Tools supports several different modes for 
audio and MIDI recording, including, by de-
fault, non-destructive recording. For more infor-
mation on audio record modes, MIDI record 
modes, Click, and Countoff options, and online 
recording, see the Pro Tools Reference Guide. 

Audio Record modes  

Non-destructive (the de-

fault), destructive, Online, Loop Recording, 
Record Pause, QuickPunch, and TrackPunch are 
the audio recording modes. 

MIDI Record modes  

Merge/Replace, Wait For 

Note, MIDI Loop Record, and MIDI Merge Loop 
Record are the MIDI recording modes. 

Click and Countoff options are also available in 
audio and MIDI recording. 

Audio Recording Modes 

To enable online recording:

■

Press ONLINE+RECORD. The ONLINE and 

RECORD switches on Control|24 and the clock 
icon on-screen in Pro Tools will flash until 
Pro Tools locks to the external transport control.

To enable loop recording:

■

Press LOOP REC (directly above the main 

TRANSPORT). For additional information, see 
“Loop Record Mode” on page 93.

To enable QuickPunch:

■

Press QUICKPUNCH. For additional informa-

tion, see “QuickPunch Recording” on page 94. 

To enable Record Pause mode:

1  

Press OPT(ALT)/ALL+RECORD. The STOP and 

RECORD switches light and the PLAY switch 
flashes. 

2  

Press PLAY to initiate recording.

TrackInput Off (Auto Input)

TrackInput On (Input Only)