Digidesign Control 24 Manuale Utente

To make the same output assignment to all 
channels simultaneously:

■

Press APPLY TO ALL CHANNELS or 

OPT(ALT)/ALL while assigning an output to a 
track. 

To make the same output assignment to selected 
channels only:

■

Press APPLY TO ALL SELECTED CHANNELS or 

OPT(ALT)/ALL+SHIFT/ADD while assigning an 
output to a track. 

To add or remove multiple output assignments:

■

Press CTL/CLUTCH while assigning or dese-

lecting an output to a track.

To temporarily display output assignment:

■

Press OUTPUT. 

Assigning MIDI Outputs

You can view and assign channel outputs for 
MIDI tracks on Control|24. You can also assign 
multiple MIDI channels to a single track.

To assign MIDI outputs from Control|24:

1  

Press ASSIGN+OUTPUT. 

2  

Turn the data encoder knob on the track to se-

lect the MIDI device and channel. 

3  

Press the flashing switch directly below the 

data encoder knob to confirm your decision. (If 
assigning multiple MIDI channels, perform 
steps 2 and 3 while pressing SHIFT/ADD.)

4  

When MIDI output assignment is completed, 

press the Master ASSIGN switch to confirm and 
exit Assign mode.

To assign multiple outputs:

■

While pressing CTL/CLUTCH, while assign-

ing an output to a track. 

TrackInput Monitoring 

TrackInput monitoring lets you toggle individ-
ual audio tracks between Auto Input and Input 
Only monitoring modes at any time, including 
during playback or recording. 

This feature also makes it possible to toggle a 
track between Auto Input and Input Only mon-
itoring mode regardless of whether or not the 
track is record enabled. 

To toggle the monitoring mode of audio tracks:

1  

Hold the CTL/CLUTCH switch and press the 

MONITOR/Ø (Monitor/Phase) switch. The 
switch flashes to indicate Control|24 is in “Se-
lect Input Monitoring” mode.

2  

Do one of the following:

• To toggle individual tracks, press the 

SWITCH ACTIVE switch on each channel 
you want to toggle.

• To toggle all tracks in the session, hold the 

OPT(ALT) ALL switch and press the MONI-
TOR/Ø switch.

• To toggle all selected tracks in the session, 

hold the SHIFT/ADD + OPT(ALT)ALL 
switches and press the MONITOR/Ø 
switch.