Digidesign Control 24 Manuale Utente

To enable MIDI Merge Loop Recording mode:

1  

Press the MIDI TOOLS switch. The LED while 

light up.

2  

Press MERGE REC.

3  

Press the LOOP PLAY switch located just 

above the primary Transport switches. The 
Record button in the Pro Tools Transport win-
dow will display a circular arrow when in Loop 
Record or Loop Playback mode. 

4  

In the Pro Tools Edit window, select the de-

sired range on the target track that will consti-
tute the loop. 

5  

Assign an input to the target track. 

6  

Press the track’s REC ARM switch to place the 

track in Record Ready mode. 

7  

Press REC+PLAY to begin recording. If in Wait 

for Note, recording will not begin until 
Pro Tools receives MIDI. 

8  

Press STOP to stop recording. 

QuickPunch Recording 

QuickPunch lets you instantaneously punch in 
(start recording) and punch out (stop recording) 
on record-enabled audio tracks during playback 
by pressing the RECORD switch in the trans-
port. 

To punch-on-the-fly using QuickPunch:

1  

Press QUICKPUNCH, located directly above 

the RECORD switch. The QUICKPUNCH red 
LED illuminates.

2  

Make sure you have set the QuickPunch 

Crossfade Length preference in the Editing page 
of Pro Tools Preferences dialog to the appropri-
ate value. 

3  

Record-enable the tracks you want to punch. 

The channel REC ARM and MASTER REC 
switches will flash. 

4  

Press PLAY. 

5  

To punch in, press RECORD in the TRANS-

PORT section. The REC ARM and MASTER REC 
switches will stop flashing and stay lit during re-
cording, as will the RECORD switch. 

6  

To punch out, press RECORD again. While 

Pro Tools is still playing back you can perform 
additional punch-ins simply by pressing 
RECORD at each punch-in/punch-out point.