Digidesign Control 24 Manuale Utente

TrackPunch Recording 

TrackPunch lets you instantaneously punch in 
(start recording) and punch out (stop recording) 
on individual audio tracks during playback. You 
can punch in on a TrackPunch-enabled track at 
any time during playback by record enabling 
the track.

Enabling TrackPunch Mode

Before you can enable individual audio tracks 
for TrackPunch recording, TrackPunch mode 
must be enabled in the Pro Tools transport. 

To enable TrackPunch mode from Control|24:

1  

Make sure Pro Tools is not recording or play-

ing back (the Transport is stopped).

2  

Hold the CTRL/CLUTCH switch and repeat-

edly press the Transport Record switch to toggle 
the on-screen Transport Record button to show 
a “T” to indicate TrackPunch mode. 

TrackPunch Mode Indicators

Control|24 does not have a TrackPunch indica-
tor. The on-screen Transport window has sev-
eral indicators that show TrackPunch status.

When TrackPunch mode is enabled:

◆

A “T” appears in the on-screen Transport 

Record button.

◆

If at least one track is TrackPunch-enabled, 

the on-screen Transport Record button lights 
solid blue.

When TrackPunch mode is enabled and the 
transport is armed for recording:

◆

If no tracks are TrackPunch-enabled, the on-

screen Transport Record button flashes gray and 
red. 

◆

If at least one track is TrackPunch-enabled, 

the on-screen Transport Record button flashes 
blue and red.

◆

If at least one TrackPunch-enabled track is 

also record enabled, the on-screen Transport 
Record button flashes blue and red, and the 
record LED lights.

◆

Whenever at least one audio track is record-

ing, the on-screen Transport Record button 
lights solid red.

Enabling Tracks for TrackPunch 
Recording

In TrackPunch mode, before you can punch in 
on a track during playback, it must be Track-
Punch enabled while the transport is stopped.

Record LED
Input Status
LED

TrackPunch Enabled