Digidesign Control 24 Manuale Utente

TrackPunch Recording

After you have put Pro Tools in TrackPunch 
mode and enabled tracks for TrackPunch record-
ing, you can record with TrackPunch in several 
ways.

Punching In On Single Tracks

To punch in on single tracks:

1  

Put Pro Tools in TrackPunch mode.

2  

Press the REC ARM switch twice on each track 

you want to punch in, so that the track is Track-
Punch-enabled only. The track’s on-screen 
Record Enable button lights solid blue. 

3  

Press the RECORD and PLAY switches on the 

Control|24 transport to start playback.

4  

During playback, punch in and out on indi-

vidual TrackPunch-enabled tracks by pressing 
their REC ARM switches.

5  

Stop playback. When you are finished with 

the record pass, track Record Enable status and 
transport Record Arm status follow the current 
TrackPunch preference settings. 

Punching In on Multiple Tracks

To punch in on multiple tracks simultaneously:

1  

Put Pro Tools in TrackPunch mode.

2  

Press the REC ARM switch on each track you 

want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track’s on-
screen Record Enable button should flash blue 
and red. 

3  

Press the PLAY switch on the Control|24 trans-

port to start playback.

4  

During playback, press the RECORD switch on 

the Control|24 transport to punch in and out on 
all TrackPunch-enabled tracks simultaneously. 

5  

Stop playback. When you are finished with 

the record pass, track Record Enable status and 
transport Record Arm status follow the current 
TrackPunch preference settings. 

Start Recording on All Tracks

To start recording on all tracks:

1  

Put Pro Tools in TrackPunch mode.

2  

Press the REC ARM switch on each track you 

want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track’s on-
screen Record Enable button should flash blue 
and red. 

3  

Press the RECORD and PLAY switches on the 

Control|24 transport to start recording on all 
record-enabled tracks.

4  

During playback, punch out and back in on 

individual TrackPunch-enabled tracks by press-
ing their REC ARM switches.

5  

Stop playback. When you are finished with 

the record pass, track Record Enable status and 
transport Record Arm status follow the current 
TrackPunch preference settings.