Digidesign Control 24 Manuale Utente

4  

The scribble strip for each track display default 

(or previously-assigned) input assignments. 

5  

Adjust the data encoder knob to scroll 

through the list of available inputs on each track 
you want to configure. 

6  

When the abbreviated name of the input you 

want appears in the scribble strip, press the 
flashing switch directly below the data encoder 
knob to confirm your decision.

7  

Adjust the data encoder knobs on any other 

tracks for which you would like to make input 
assignments. Press the flashing switches directly 
below the data encoder knobs to confirm any 
other choices.

8  

Press ASSIGN or ESC/CANCEL to leave Input 

Assignment mode. The ASSIGN and ESC/CAN-
CEL switches will stop flashing to indicate that 
you have left the Assignment mode.

Instrument Tracks

The Instruments View in Pro Tools contains 
MIDI controls that can be displayed on Con-
trol|24 data encoders.

To display MIDI controls (“Input Mode”):

1  

Press F1 to make sure you are in Home mode. 

(MIDI controls cannot be accessed from Chan-
nel mode.)

2  

Press the F3 switch.

The following MIDI controls appear on each 
channel as follows:

• Channel data encoder: MIDI Volume

• Select switch: MIDI Mute

• Track meter in Meter Bridge: MIDI Velocity 

Meter

To exit display of MIDI controls:

■

Press the F3 switch again.

Master Faders

Master Faders are used to control levels and in-
sert processing for various types of mix and sub-
mix outputs.

You can assign as many Master Faders as you 
wish, and bring them up on the Control|24 fad-
ers with the MASTER FADERS switch.

MASTER FADERS Switch

The MASTER FADERS switch brings all Master 
Faders to the fader bank with a single switch. 

To call up all Master Faders:

■

Press the MASTER FADERS switch, located to 

the right of the fader bank, directly below the 
UTILITY switch. 

The MASTER FADERS switch LED will flash and 
all Master Faders in the current Pro  Tools session 
(regardless of Show/Hide status) are “banked” to 
the Control|24 faders. Master Faders fill the 
fader bank beginning from the right-most fader 
(closest to the Transport section).