Digidesign Control 24 Manuale Utente

MASTER BYPASS Switch

The MASTER BYPASS switch has two functions, 
depending on the current state of the IN-
SERTS/PARAM switch/mode:

• When in INSERTS mode, the MASTER BYPASS 

switch acts as a master bypass for all plug-ins 
on the channel. When this occurs, the MAS-
TER BYPASS switch LED lights solid.

• When the INSERTS/PARAM switch is set to 

PARAM mode, the MASTER BYPASS switch 
acts as a master bypass for the plug-in cur-
rently being edited. When this occurs, the 
MASTER BYPASS switch LED lights solid.

When the MASTER BYPASS switch is not lit, this 
default state indicates that neither bypass mode 
is engaged.

The COMPARE switch lights when a saved plug-
in preset has been changed but not saved. As in 
Pro Tools on-screen, the Compare function is a 
quick and easy method for toggling between 
new settings and a saved preset.

Assigning a Plug-In

To assign a plug-in:

1  

Press the INSERTS switch on the channel to 

which you want to assign a plug-in. The abbre-
viated names of the five inserts for that channel 
appear horizontally across the channel scribble 
strips and the channel name appears in the 
channel bar display. 

2  

Press the master ASSIGN switch, located in the 

ASSIGN section of the CHANNEL BAR. The 
switch LED will flash, indicating that ASSIGN 
mode is now active. 

3  

Adjust the channel’s encoder knob to scroll 

through the available plug-ins. Only one plug-
in can be assigned at a time. 

4  

Press the flashing encoder switch to confirm 

the current choice displayed in the scribble 
strip. The abbreviated name of the plug-in will 
be displayed (flashing) in the scribble strips. 

5  

The master ASSIGN switch will continue to 

flash, indicating that ASSIGN mode is still active 
and that you can select plug-ins for the other in-
sert positions. 

6  

Press the master ASSIGN switch to confirm the 

last choice made and exit the assign mode en-
tirely.

Double-pressing the flashing encoder switch af-
ter selecting a plug-in will confirm the current 
choice and bring up the plug-in’s editable pa-
rameters to the channel scribble strips. The IN-
SERTS/PARAM switch LED will light solid, indi-
cating that you are in PARAM mode. 

You can exit Assignment mode before commit-
ting to a plug-in choice by pressing the flashing 
ESC/CANCEL switch. The flashing encoder 
switch and the master ASSIGN switch LED’s be-
come unlit and Control|24 will return to its pre-
vious state.