Digidesign Control 24 Manuale Utente
Control|24 Guide
118
AUTOMATION ENABLE Switches
Control|24 AUTOMATION ENABLE switches,
located to the left of the channel faders, are
identical to those found in the Pro Tools Auto-
mation Enable window.
located to the left of the channel faders, are
identical to those found in the Pro Tools Auto-
mation Enable window.
These switches provide session-wide control of
Volume, Pan, Mute, Send Level and Mute, and
plug-in automation.
Volume, Pan, Mute, Send Level and Mute, and
plug-in automation.
Refer to the Pro Tools Reference Guide for an ex-
planation of the Automation Enable window in
Pro Tools.
planation of the Automation Enable window in
Pro Tools.
Channel AUTO Switches
The channel AUTO switch is useful to set most
automation modes for individual channels
within the same bank. It enables you to change
a channel automation from Read to any write
mode when playback is stopped, and enables
you punch out of automation recording at any
time.
automation modes for individual channels
within the same bank. It enables you to change
a channel automation from Read to any write
mode when playback is stopped, and enables
you punch out of automation recording at any
time.
The Automation Mode switches are fastest for
setting the Automation mode on selections of
channel strips, groups of channels that are on
different banks, or in conjunction with the
modifier keys such as APPLY TO ALL and
OPT(ALT)/ALL (in this case, both would accom-
plish the same result).
setting the Automation mode on selections of
channel strips, groups of channels that are on
different banks, or in conjunction with the
modifier keys such as APPLY TO ALL and
OPT(ALT)/ALL (in this case, both would accom-
plish the same result).
To assign an Automation mode on individual
channels within the same bank:
channels within the same bank:
■
Press the channel AUTO switch repeatedly to
step through the available Automation modes.
– or –
■
Hold down one of the master AUTOMATION
MODE switches (WRITE, TOUCH, LATCH,
TRIM, READ or OFF), then press the channel
AUTO switch.
TRIM, READ or OFF), then press the channel
AUTO switch.
Suspending Automation
This switch is located directly below the Auto-
mation mode and Enable switches. The AUTO
SUSPEND switch globally suspends record and
playback of all automation parameters on all
channel strips. All channels are left in their
present mode, but automation operations are
temporarily suspended. This enables you to ex-
periment or rehearse automation moves with
faders or other controls while ignoring existing
automation data.
mation mode and Enable switches. The AUTO
SUSPEND switch globally suspends record and
playback of all automation parameters on all
channel strips. All channels are left in their
present mode, but automation operations are
temporarily suspended. This enables you to ex-
periment or rehearse automation moves with
faders or other controls while ignoring existing
automation data.
To suspend all automation data on all tracks:
■
While Pro Tools is stopped, press AUTO SUS-
PEND. The AUTO SUSPEND switch will flash
while automation is suspended.
while automation is suspended.
Press AUTO SUSPEND again to re-enable auto-
mation.
mation.
Shortcuts
• While pressing OPT(ALT)/ALL or APPLY TO
ALL CHANNELS, press one of the master AU-
TOMATION/MODE switches to assign to all
channels.
TOMATION/MODE switches to assign to all
channels.
• While pressing OPT(ALT)/ALL+SHIFT/ADD or
APPLY TO ALL SELECTED CHANNELS, press
one of the master AUTOMATION/MODE
switches to assign to all selected channels.
one of the master AUTOMATION/MODE
switches to assign to all selected channels.
Enabling and Suspending
Automation Types
Automation Types
To enable (or suspend) volume, pan, mute, send
level, send mute, or plug-in automation:
level, send mute, or plug-in automation:
■
Press the appropriate switch in the AUTOMA-
TION/ENABLE switch section.