Digidesign Control 24 Manuale Utente

3  

Move the cursor back so that it is just before 

the stop location.

4  

Resume playback.

At the AutoJoin Indicator, automation record-
ing resumes automatically for all controls in 
Latch mode.

Automating Sends

Control|24 enables you to dynamically auto-
mate send levels/mutes and (stereo) send pan 
using either the channel data encoders or the 
channel faders in Flip mode (see “Using Flip 
Mode with Sends” on page 106 for a description 
of Send Flip mode). 

To automate a send level:

1  

Make sure that SEND LEVEL is engaged (indi-

cated by its switch LED being lit) in the AUTO-
MATION/ENABLE switch section. 

2  

Choose an automation mode for the channel 

you wish to automate by doing one of the fol-
lowing:

• Pressing the channel’s AUTO switch to step 

through automation modes.

– or –

• Pressing the channel’s AUTO switch, while 

pressing a master AUTOMATION MODE 
switch. 

3  

Display the SEND LEVEL control by pressing 

the relevant master SEND switches (A/F–E/J). In 
this mode, the encoder can be used to enter and 
record send level automation data. 

4  

Press PLAY. Automation recording begins, and 

adjustments to the data encoder knob will be re-
corded as automation data. 

To automate Send Mute:

1  

Make sure SEND MUTE automation is en-

abled. 

2  

Select a SEND by pressing the relevant master 

SEND switches (A/F–E/J). 

3  

Press the master SEND MUTE switch to place 

the channel encoder switch in Send Mute mode. 

4  

Arm the channel for automation recording 

and press PLAY. Automation recording begins. 

5  

Use the channel encoder switch to mute 

sends. 

Displaying Automation Breakpoints in 
the Edit Window

To show automation data using the keyboard 
shortcut:

■

While pressing 

(CTL)+CTL/CLUTCH (or 

Command+Control from your alpha-numeric 
keyboard), use the mouse to click any automat-
able channel control on-screen in Pro Tools.

These controls include volume fader or display, 
pan control or display, send level or mute, or 
any automation-enabled plug-in parameter. 

The Edit window track displays the automation 
data for the parameter you clicked.