Digidesign Control 24 Manuale Utente

Selecting Monitor Modes

Control|24 supports Stereo, LCRS, and 5.1 Sur-
round modes. 

Stereo Mode Settings

Stereo monitoring mode can be configured for 
Single-source, or Multi-source monitoring. 

If in “Single” source monitoring mode, only one 
input source can be engaged at a time. To mon-
itor more than one source input, Control|24 
must be in either “Multi” mode, or Surround 
mode. 

To select Source Monitoring Mode:

1  

Press the Utility switch.

2  

Select “Monitor.”

3  

Select “Stereo.”

4  

Select either “Single” or “Multi” mode.

5  

Select “Exit” or press the Utility switch again 

to return to normal operation.

Monitor Input Source Select 
Switches 

The Control Room Monitor section comprises a 
set of six possible stereo monitor sources for 
Control|24 in stereo mode, or as master source 
controls for the matrix inputs in Surround 
mode.

To engage an Input Source:

■

Press the switch in the Control Room Monitor 

section that corresponds to the desired input 
source. If Control|24 is in Single-source stereo 
mode, selecting any input source deselects the 
current source. If configured for multi-source 
stereo mode, selecting any input source adds 
that source signal to the current input source 
mix.