Digidesign Control 24 Manuale Utente

MONITOR TO AUX and AUX LEVEL 

When enabled in stereo monitor mode, the 
MONITOR TO AUX switch sends the current 
Control Room Monitor mix to the AUX mix 
outputs. This mix can be any combination of 
sources as selected in the Control Room Moni-
tor section, and is adjusted with the AUX LEVEL 
control.

Control Room Monitor Level 
Controls

The Control Room Monitor section’s level con-
trols adjust the volume of your outputs. 

MAIN MONITOR LEVEL Control

In Stereo Monitor mode, this rotary control ad-
justs the level of the main stereo Control Room 
Monitor level

.

In Surround Monitor modes, this rotary control 
acts as a level master for the entire Surround ma-
trix (outputs 1 through 6). 

Calibrating Monitor Systems for Control|24 
Monitor Output Level

To achieve the best performance from the MAIN 
MONITOR LEVEL control, set your monitor 
power amplifier (or powered monitor gain) so 
that reasonably loud (but not excessively loud) 
monitor levels are achieved when the MAIN 
MONITOR LEVEL control is at approximately 
the 2 o’clock position. This allows enough gain 
to check low level detail such as reverb tails and 
fade outs, while providing a good working range 
of adjustment and the best signal-to-noise per-
formance. 

ALT Monitor Level Control

The Alt Monitor Level controls a second set of 
stereo outputs.

Alt Monitor in Stereo Mode

In Stereo mode, the ALT switch routes the Con-
trol Room Monitor mix to the ALT outputs. 
Pressing the ALT switch mutes the Main Moni-
tor outputs. 

When the ALT switch is pressed while in Stereo 
monitor mode, the ALT MONITOR rotary con-
trol adjusts the level of the ALT Stereo Control 
Room Monitor output. 

The ALT outputs are often used for a pair of 
near-field speakers, but can be routed to any ste-
reo monitoring system.