Brother NC-2200W Manuale Utente
NC-2200W WIRELESS SETTING 2 - 1
2
NC9100h_FM6.0
2
NC-2200w Wireless Setting
Setting up NC-2200 Wireless Setting
General
To connect the NC-2200w to your wireless network, follow the steps
in the Quick Setup Guide.
in the Quick Setup Guide.
TCP/IP functions
After completed the wireless setup for NC-2200w, following TCP/IP
functionalities are available. You must have a valid IP address
programmed into the NC-2200w and your computer to use TCP/IP
functionalities except for the address setting protocols such as
DHCP/BOOTP/RARP and APIPA.
functionalities are available. You must have a valid IP address
programmed into the NC-2200w and your computer to use TCP/IP
functionalities except for the address setting protocols such as
DHCP/BOOTP/RARP and APIPA.
DHCP/BOOTP/RARP
By using the DHCP/BOOTP/RARP protocols, the IP address can be
automatically configured.
By using the DHCP/BOOTP/RARP protocols, the IP address can be
automatically configured.
■
If you have already used the NC-2200w on another network, re
initialize the NC-2200w to its factory default settings.
initialize the NC-2200w to its factory default settings.
■
The NC-2200w cannot be used with a USB HUB.
■
Only use the supplied AC adapter.
■
Only connect Brother Printer/MFC/DCP to the NC-2200w USB
port.
port.
■
Do not disconnect the USB cable while setting up, printing or
scanning
scanning
.
To use the DHCP/BOOTP/RARP functions, please contact
your network administrator.
your network administrator.