Brother NC-2200W Manuale Utente

2 - 6 NC-2200W WIRELESS SETTING

Most Wireless networks use some kind of security settings. These 
security settings define the authentication (how the device identifies 
itself to the network) and encryption (how the data is encrypted as it 
is sent on the network). If you do not correctly specify these options 
when you are configuring your Brother wireless device, it will not be 
able to connect to the Wireless network. Therefore care must be 
taken when configuring these options. Please refer to the information 
below to see which authentication and encryption methods your 
Brother wireless device supports. For more information on Wireless 
communication visit, http://solutions.brother.com/wireless

The Brother NC-2200w supports the following methods:

■

Open System

Wireless devices are allowed access to the network without any 
authentication.

■

Shared Key (Infrastructure mode only)

A secret pre-determined key is shared by all devices that will 
access the wireless network.
The NC-2200w uses following WEP key as pre-determined key.

Encryption is used to secure the data itself. The NC-2200w supports 
WEP encryption.

■

None

No encryption method is used.

■

WEP

By using WEP (Wired Equivalent Privacy), the data is transmitted 
and received with a secure key.