Brother NC-2200W Manuale Utente

NC-2200W WIRELESS SETTING 2 - 9

Before you can use the Brother Printer/MFC/DCP in a wireless 
network, the NC-2200w must be configured to match your network 
configuration.

To configure the NC-2200w from a wireless computer on your 
network, you must temporarily change your current wireless settings. 
Before changing the current wireless settings of your computer, we 
recommend you make a note of your current wireless network 
settings. You will need to return to these settings at the end of 
configuring the print/scan server.

To communicate with the un-configured NC-2200w change your 
wireless computer settings to:

Communication mode:Ad-hoc  (channel 11)

Network name (SSID/ESSID):SETUP (case sensitive)

Please refer to your wireless card manufacturer instructions for 
changing the wireless settings. And then go to Step 3 Configuring the 
Print Server.

We recommend you to contact your network administrator if 
you need assistance with your computers wireless settings.

Before installation, if you are using Personal Firewall 
software (e.g. the Internet Connection Firewall available in 
Windows XP), disable it. Once you are sure that you can 
print, re-start your Personal Firewall software.