Brother NC-2200W Manuale Utente

6 - 9 TROUBLESHOOTING

Make sure the status and configuration of the NC-2200w and the 
Printer/MFC/DCP, check following:

Check if the Brother NC-2200w power is turned on

Check if the Brother NC-2200w is securely connected to the 
Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered 
on.

Make sure the printer/MFC/DCP is on-line and ready to print.

Move your PC closer to the Brother Printer/MFC/DCP with the 
NC-220w installed and try gain 

Print the Network configuration page of the NC-2200w and 
check if the settings such as wireless and IP address settings 
are correct for your network. The problem may be the result of 
mismatched wireless setting, or mismatched or duplicate IP 
address. Verify that the Wireless settings and the IP address are 
correctly loaded into the NC-2200w. And make sure that no 
other nodes on the network have this IP address.

Try pinging the NC-2200w from the host operating system 
command prompt with the command:

ping ipaddress

Where the 

ipaddress

 is the NC-2200w IP address (note that 

in some instances it can take up to a few minutes for the NC-
2200w to load its IP address after setting the IP address or 
powered on).