Biostar P4TSG Pro Manuale Proprietario
8
Dual Channel Configuration Table
•
Dual Channel Configuration Table
DIMM Slot
DDRA1
DDRA2
DDRB1
DDRB2
System
Density
Lightly Loaded
Config
128MB --
1GB
128MB --
1GB
256MB --
2GB
Lightly Loaded
Config
128MB --
1GB
128MB --
1GB
256MB --
2GB
Fully Loaded
Config
128MB --
1GB
128MB --
1GB
128MB --
1GB
128MB --
1GB
512MB --
4GB
DRAM Access Time: 2.5V Unbuffered/ no registered (without ECC) DDR SDRAM
PC2100/ PC2700/ PC3200 Ty pe required.
DRAM Ty pe: 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
Installing Wireless LAN Card
1.
Align the wireless LAN on the slot so that the wireless LAN card matches in
the slot. Be sure to face the wireless LAN card with its components towards
the inner part of the motherboard as it shows on the following picture.
the slot. Be sure to face the wireless LAN card with its components towards
the inner part of the motherboard as it shows on the following picture.
2.
Insert the wireless LAN card vertically and firmly into the slot so the wireless
card is properly seated.
card is properly seated.