Biostar P4TSG Pro Manuale Proprietario
6
CPU Installation
Step1: Pull the lever sideway s away from the socket and then raise the lev er up to a
90-degree angle.
Step2: Look f or the white dot/cut edge. The white dot/cut edge should point wards the lev er
piv ot. The CPU will f it only in the correct orientation.
Step3: Hold the CPU down f irmly, and then close the lever to complete the installation.
Step4: Put the CPU Fan on the CPU and buckle it. Connect the CPU fan power cable to
the JCFAN1. This completes the installation.
Step1 Step2 Step3 Step4
CPU Fan Headers: JCFAN1
Pin
Assignment
1
Ground
2
+12V
1
JCFAN1
3
FAN RPM Sense
S ystem Fan Headers: JSFAN1
Pin
Assignment
1
Ground
2
+12V
1
JSFAN1
3
FAN RPM Sense