Benq PB9200 Manuale Utente
Multifunctional Settings
34
NETWORK Menu
This projector provides the NETWORK function. If you use
this function, please set up the projector according to the
Network environment in which you use it.
this function, please set up the projector according to the
Network environment in which you use it.
memo
If DHCP function on your Network is activated, the
following operation is not normally required, because
DHCP function on this projector is active as initial settings.
Please see the section “Network Setting Up”.
DHCP function on this projector is active as initial settings.
Please see the section “Network Setting Up”.
Item
Description
SETUP
Press the
4 (or the ENTER) button,
then the IP ADDRESS menu as right
comes up.
comes up.
memo
This menu will be shown only
when the DHCP is disabled at the
NETWORK menu. The IP Address is
identification number of the projector on the Network.
1. Set the IP Address using the
NETWORK menu. The IP Address is
identification number of the projector on the Network.
1. Set the IP Address using the
5 / 6 buttons.
memo
The same IP Address with
other units cannot be used. Press the
4 (or the ENTER) button at the IP
ADDRESS menu, then the SUBNET
MASK menu comes up. The SUB-
NET MASK is an address of the Net-
work.
2. Set the address of the Network to
be used. Press the
MASK menu comes up. The SUB-
NET MASK is an address of the Net-
work.
2. Set the address of the Network to
be used. Press the
4 (or the ENTER)
button at the SUBNET MASK menu,
then the DEFAULT GATEWAY menu
comes up. The DEFAULT GATEWAY
is the main device to access outside of
the Network.
3. Set the address of the device as gateway to an outer Network.
then the DEFAULT GATEWAY menu
comes up. The DEFAULT GATEWAY
is the main device to access outside of
the Network.
3. Set the address of the device as gateway to an outer Network.
DHCP
Select the TURN ON or the TURN OFF using the
5
/
6 buttons. :
TURN ON
TURN OFF
If your Network doesnt support the DHCP function,
select the TURN OFF.
select the TURN OFF.
INFORMATION
Pressing the
4 (or the ENTER) but-
ton displays the INFORMATION
menu.
The menu shows the information
about the current Network setting as
illustrated right.
menu.
The menu shows the information
about the current Network setting as
illustrated right.
RESET
Select the EXECUTE using the
5 button to reset the NETWORK
menu items. :
EXECUTE
CANCEL
All items on the NETWORK menu are returned to the initial setting.
:RETURN
ESC
ENT :NEXT
NETWORK - SETUP
IP ADRRESS
192 . 168 . 1 . 24
:RETURN
ESC
ENT :NEXT
NETWORK - SETUP
SUBNET MASK
255 . 255 . 255 . 1
:RETURN
ESC
ENT :NEXT
NETWORK - SETUP
DEFAULT GATEWAY
255 . 255 . 255 . 0
NETWORK
DHCP
TURN ON
TURN OFF
NETWORK-INFORMATION
IP ADRRESS
192. 168. 1. 24
SUBNETMASK
255. 255. 255. 0
DEFAULT GATEWAY
255. 255. 255. 0
MAC ADRRESS
00. E0. 47. 03. 0C. D8
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
SETUP
DHCP
INFORMATION
RESET
DHCP
INFORMATION
RESET
TURN OFF
PB9200-e.book Page 34 Thursday, May 27, 2004 2:15 PM