Beko 19WLP530HID Manuale Utente

-26-

Helpdesk: 0845 600 4911

If this function is set to 

On, your television will search for new software through OAD 

(Over Air Download) when it is in Stand-by mode and install new software if any are 

found. If new software is installed by this method, your television will inform you with a 

warning display when it is turned on for the first time after such installation.

When a new software is found through OAD (On Air Download) from this menu, it 

will be installed automatically. Select Software Update tab and press the OK button. 

Your television will start to search for a new software and perform the software install 

process if a new software exists.
Note:  Software Update tab is not displayed in the Analogue mode.

You can set the Decoder Setting tab to 

On/Off by pressing the Right/Left 

movement buttons. When it is set to 

ON, RF signal will be output from the SCART 

output. This option must be set to ON when a Decoder is connected to SCART. 

When this option is set to 

OFF, RF signal will not be output from the SCART output. 

This option appears in the menu when the Signal Source is set to SCART. It is not 

displayed in the menu in other options.

In the Parental Control menu, you can 

preclude channels that are not appropriate for 

children and set age restriction for programs 

being broadcasted. Password screen will be 

displayed when entering this menu. The menu 

will open only when the correct password is 

entered. The default password is set as 

0000. 

You can change the password from the Set 

PIN menu as you wish.

PARENTAL CONTROL

Lock System

Off

Set PIN
Block Programme
Parental Guidance

Off

Select

Back

Exit

Panel Lock

Off

When the Lock System feature is set to 

On , a password is prompted if you want 

to enter in the 

Auto Tuning, Digital Manual Tuning, Analogue Manual Tuning 

submenus in the 

Channel Setup menu and the Program Table menu. These 

menus are not accessible unless the correct password is entered.

You can change your Parental Control password from this menu as you wish. To do 

this, select 

Set PIN tab and press OK button. Set PIN menu will be displayed. Once 

you enter your new password two consecutive times, your password will be changed.

With the Block Program feature, you can lock the desired channel and prevent 

it from being viewed unless the correct password is entered. To do this, select 

Block Programme tab from the Parental Control menu by pressing the UP/Down