Beko 19WLP530HID Manuale Utente

-27-

Helpdesk: 0845 600 4911

movement buttons and confirm your selection with 

OK button. Block Programme 

menu will be displayed. Select the channel you want to block from the Block 

Programme menu with 

Up/Down buttons and confirm with the GREEN button on 

your remote control. A lock symbol will appear next to the channel name. When 

a blocked channel is selected, the password screen will be displayed and the 

channel will not appear until the correct password is entered. If you do not enter the 

password, 

CH BLOCKED will be displayed on the screen. There will also be a lock 

symbol next to the blocked channel in the Program Table. Repeat the same steps to 

remove the blocking.

If it is supported by the broadcaster, this feature allows you to enter an age restriction 

between 4 and 18 for the programs broadcasted. If the program to be broadcasted 

is over the age restriction you entered, the channel will not be displayed and a 

password screen will appear. To view the program, correct password must be 

entered. Enter an age limit between 8 and 18 from the Parental Guidance tab in order 

to activate this feature.

If this feature is turned On, the control buttons on your LCD Television will be locked 

and will not function. When it is set to off, control buttons will become active.

Press the 

ZOOM button on your remote control while watching a channel to activate 

this feature. The image is zoomed in 3 stages oriented to the centre.
Note 1: Zoom feature is aborted when the channel is changed.
Note 2: Zoom feature is not available in Digital Mode.

You may freeze the program picture you are watching with this feature. For this, press 

the 

Timeshift button on your remote control. The program picture will freeze until the 

same button is pressed a second time. 

Freeze: On, Freeze: Off OSD will appear 

each time you press the 

Timeshift button.

With this feature, you can follow the teletext broadcasts simultaneously with the 

current program, provided that the current program contains teletext broadcast. For 

this purpose, when you press 

TXT and then 16:9 buttons in a channel with teletext 

broadcasting, the screen will be split into two with the left pane showing the currently 

watched program and the right pane will show the Teletext at the same time. In 

the event that you wish to exit the 

PAT mode for any reason, simply press the TXT 

button.