One Stop Gardens 95295 Manuale Utente
Page 10
SKU 95295
For technical questions, please call 1-800-444-3353.
operation inStructionS
read the entire iMportant SaFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
in an emergency, to prevent an accident, the awning can be
immediately stopped by releasing the switch.
Push the switch to the extend position and hold it to extend the awning.
Release the switch to stop the awning in place.
Push and hold the switch to retract the awning.
The awning should automatically stop when fully extended and when fully retract-
Release the switch to stop the awning in place.
Push and hold the switch to retract the awning.
The awning should automatically stop when fully extended and when fully retract-
ed. If not, the distance will need to be adjusted using the controls noted under
“Extension/Retraction Distance Adjustment”.
If the awning stops operating and will not respond to the switch, it is likely over-
If the awning stops operating and will not respond to the switch, it is likely over-
heated. Allow the awning to cool for at least 15 minutes and then attempt to
operate it again.
The awning also includes a Manual Operation Handle (12) that can be hooked
The awning also includes a Manual Operation Handle (12) that can be hooked
onto the Manual Retractor (4) and turned to extend or retract the awning without
power.
Maintenance and SerVicing
risk of serious personal injury from accidental starting or
electric shock. disconnect the power supply before any
inspection, maintenance, or cleaning procedures.
damaged equipment can fail, causing serious personal
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment. if abnormal noise or
vibration occurs, have the problem corrected before further
use.
beFore each uSe, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation.
aFter uSe, clean external surfaces with clean, moist cloth.
warning! if the supply cord or switch are damaged, they must be re-
aFter uSe, clean external surfaces with clean, moist cloth.
warning! if the supply cord or switch are damaged, they must be re-
placed only by a qualified service technician.
1.
2.
3.
4.
2.
3.
4.
5.
.
1.
2.
3.
3.