One Stop Gardens 95295 Manuale Utente
Page 9
SKU 95295
For technical questions, please call 1-800-444-3353.
Wire color code:
Green ........Ground
White .........Neutral
Red ...........Retract awning
Black .........Extend awning
White .........Neutral
Red ...........Retract awning
Black .........Extend awning
Take note of which switch position is to retract and which position is to extend the
awning. Note the control positions next to the switch in the enclosure.
angle adjustment
to prevent damage to the awning and personal injury,
have one or two assistants help support the awning while
adjusting the angle.
The awning’s angle should be adjusted with the awning retracted.
Slightly loosen the three Angle Adjusting Bolts/Nuts (r,e) on one side of the aw-
Slightly loosen the three Angle Adjusting Bolts/Nuts (r,e) on one side of the aw-
ning. Adjust that side of the awning to the desired angle. Tighten the Angle
Adjusting bolts.
Slightly loosen the Angle Adjusting Bolts on the other side of the awning. Ob-
Slightly loosen the Angle Adjusting Bolts on the other side of the awning. Ob-
serve the Level (21) while you adjust the angle of the awning. Once the level is
even, then tighten the Angle Adjusting Bolts.
extension/retraction distance adjustment
The Awning extension and retraction cutoffs are factory set.
On the Left Roller Shaft (5) there are two recessed hexagon controls. The upper
On the Left Roller Shaft (5) there are two recessed hexagon controls. The upper
control adjusts the extension distance, and the lower control adjusts the retrac-
tion distance.
2.
•
•
•
•
•
•
•
3.
1.
2.
2.
3.
1.
2.
2.