Hughes AN6-098P Manuale Utente

 

This section explains how to install the J-type radio assembly. 
You must use the antenna kit indicated in Table 1 on page 8 for 
the J-type radio assembly.

Attach the upper mounting bracket to the transmitter:

1. Place the upper mounting bracket onto the transmitter, in the 

position shown in Figure 27.
Align the two bolt holes in the bracket with the holes in the 
transmitter.

2. Secure the bracket to the transmitter with two 

5

⁄

16

-18 × 1-inch 

hex bolts, lock washers, and flat washers.

3. Tighten the bolts. 

Figure 27:  Attaching the upper mounting bracket

Mounting 

bracket

Transmitter

Bolts

Note: The transmitter may look a little 
different than the one shown here.