Hughes AN6-098P Manuale Utente

 

The feed horn and waveguide transition are shipped from the 
factory pre-attached, as shown in Figure 28. 

Attach the square end of the waveguide transition (with the feed 
horn attached) to the radio assembly—specifically, to the 
transmit/receive isolation assembly, or TRIA:

1. Apply silicone grease to the O-ring groove in the waveguide 

transition. See Figure 29.
The silicone grease is provided in a small plastic capsule.

2. Place the O-ring (1-inch inside diameter) in the O-ring 

groove in the square end of the waveguide transition.     

Figure 28:  Feed horn with waveguide transition attached

O-ring 
groove

Waveguide 

transition

Note:

The O-ring and small hardware for the square end of 

the waveguide transition are shipped in a bag that contains 
four socket-head cap screws. 

Figure 29:  O-ring in groove in waveguide transition

O-ring