Hughes AN6-098P Manuale Utente

 

This section explains how to install the cradle-type radio 
assembly. You must use the antenna kit indicated in Table 1 on 
page 8 for the cradle-type radio assembly.

7. To attach the feed horn to the radio assembly, refer to Figures 

34 and 35 and follow steps 1 through 3 below. 

1. Remove the protective covering from the small end of the 

feed horn. 

Figure 34:  Attaching the feed horn and radio assembly

T0172013

Feed horn

O-ring

Screws and

washers

• If you do not remove the protective covering from the 

• Do not remove the protective packing material from the