Chauvet Baby Accessories ST-800X Manuale Utente

  

 

 

Operating 

Instructions 

ST-800X User Manual   

12 

 

2007-03-07

/

10:58

 

Each fixture requires a "start address" from 1 to 511. A fixture requiring one or more channels for 

control begins to read the data on the channel indicated by the start address. For example, a fixture 

that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would 

read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the 

channels used do not overlap and notate the start address selected for future reference.  If this is 

your first time setting a DMX address then read the DMX Primer in the Appendix Section. 

The ST-800X is controlled using 2 channels of DMX, therefore you would space fixtures every two 

channels. For example: Fixture 1 = (001), Fixture 2 = (003), Fixture 3 = (005) and so on. 

Visit the section titled; Binary & DIP-switch Addressing on page 14 & Binary Addressing Quick 

Reference Chart on page 15 to quickly determine the binary DIP-switch settings for addressing your 

fixture.