Alsoft DiskWarrior - 4.0 Manuale Istruttivo
Installation of DiskWarrior
Chapter 2: Using DiskWarrior
20
Be sure to register your purchase
If you received DiskWarrior on a Disc, then you should perform the following steps:
1) Note your DiskWarrior serial number on the Disc label.
2) Completely fill out the product registration card and mail it to Alsoft. Be sure to
include the serial number. You can also register your product on the Web at
<http://www.Alsoft.com/registrationform.html>.
2) Completely fill out the product registration card and mail it to Alsoft. Be sure to
include the serial number. You can also register your product on the Web at
<http://www.Alsoft.com/registrationform.html>.
Note:
Your DiskWarrior serial number is required for proper registration of your purchase
so that you may receive Technical Support, updates and future product special offers.
If You Received DiskWarrior Electronically
DiskWarrior cannot be run from the disk image containing the DiskWarrior application that you
received electronically. Please refer to
received electronically. Please refer to
install DiskWarrior. It is recommended that you put the disk image containing the DiskWarrior
application and the other files on another hard disk or a third-party removable media disk so
that you have a copy of DiskWarrior available even if you cannot access your startup disk.
application and the other files on another hard disk or a third-party removable media disk so
that you have a copy of DiskWarrior available even if you cannot access your startup disk.
Record the registration number you received in the e-mail that confirmed your purchase of
DiskWarrior. You will need this serial number the first time you run DiskWarrior.
DiskWarrior. You will need this serial number the first time you run DiskWarrior.
If You Received DiskWarrior on a Disc
DiskWarrior can be run directly from the DiskWarrior Disc, and your Mac OS computer can be
started from this Disc. This will allow you to rebuild the directories on any HFS or HFS Plus disks
that DiskWarrior can rebuild as described in this chapter, including your normal startup disk.
started from this Disc. This will allow you to rebuild the directories on any HFS or HFS Plus disks
that DiskWarrior can rebuild as described in this chapter, including your normal startup disk.
Installing DiskWarrior
Installation of DiskWarrior will require an administrative password and your DiskWarrior serial
number. Follow these steps to install DiskWarrior:
number. Follow these steps to install DiskWarrior:
Note:
If you suspect there is directory damage on your disk, then you should proceed to
DiskWarrior on your disk. Alsoft recommends that you run DiskWarrior on your disk before