Alsoft DiskWarrior - 4.0 지침 매뉴얼

 

If you received DiskWarrior on a Disc, then you should perform the following steps:

1) Note your DiskWarrior serial number on the Disc label.
2) Completely fill out the product registration card and mail it to Alsoft. Be sure to 
include the serial number. You can also register your product on the Web at 
<http://www.Alsoft.com/registrationform.html>.

 

Your DiskWarrior serial number is required for proper registration of your purchase 

so that you may receive Technical Support, updates and future product special offers.

 

DiskWarrior cannot be run from the disk image containing the DiskWarrior application that you 
received electronically. Please refer to 

 

install DiskWarrior. It is recommended that you put the disk image containing the DiskWarrior 
application and the other files on another hard disk or a third-party removable media disk so 
that you have a copy of DiskWarrior available even if you cannot access your startup disk.

Record the registration number you received in the e-mail that confirmed your purchase of 
DiskWarrior. You will need this serial number the first time you run DiskWarrior.

 

DiskWarrior can be run directly from the DiskWarrior Disc, and your Mac OS computer can be 
started from this Disc. This will allow you to rebuild the directories on any HFS or HFS Plus disks 
that DiskWarrior can rebuild as described in this chapter, including your normal startup disk.

 

Installation of DiskWarrior will require an administrative password and your DiskWarrior serial 
number. Follow these steps to install DiskWarrior:

 

If you suspect there is directory damage on your disk, then you should proceed to 

 

DiskWarrior on your disk. Alsoft recommends that you run DiskWarrior on your disk before