DAELIM ROADWIN 125 FI Manuale Utente

41

1. Raise the front wheel off the ground by

placing a support block under the
engine. 

2. Loose the oval screw and remove the

speedometer cable. 

3. Remove the front caliper assembly

from the fork by removing the fixing
bolts. 

4. Loosen the axle nut. 

5. Withdraw the front wheel axle, side

collar and remove the front wheel. 

INSTALLATION NOTES:

●Position the front wheel between the

fork legs and insert the axle from the
right side, through the left fork leg and
wheel hub.

●Prior to assembling, align the projected

part(

) of the speedometer gear box

with the projected part of the left front
fork. 

FRONT WHEEL AXLE

PROJECTED PART

●Do not depress the brake lever when

the wheel is off the motorcycle.
The caliper piston will be forced out
of the cylinder with subsequent loss
of brake fluid. If this occurs,
servicing of the brake system will be
necussary. See your authorized
Daelim dealer for this service.

SPEEDOMETER
CABLE

BRAKE CALIPER
ASSEMBLY

OVAL SCREW

AXLE NUT

FIXING BOLTS

●When installing the wheel, carefully

fit the left brake disk between the
brake pads to avoid damaging the
pads.