Burnham MPC (Multi-Pass Commercial) Istruzione Sull'Installazione

IMPORTANT INFORMATION -

READ AND sAvE ThEsE INsTRucTIONs FOR REFERENcE

All boilers must be installed in accordance with National, state and Local Plumbing, heating and Elec-

trical codes and the regulations of the serving utilities. These codes and Regulations may differ from

this instruction manual. Authorities having jurisdiction should be consulted before installations are

made.

In all cases, reference should be made to the following standards:

usA BOILERs

A. current Edition of American National standard ANsI/NFPA 31, “Installation of Oil Burning

Equipment”, for recommended installation practices.
B. current Edition of National Fuel Gas code, NFPA 54/ANsI Z223.1.
c. current Edition of American National standard ANsI/NFPA 211, “chimneys, Fireplaces, vents,

and solid Fuel Burning Appliances”, for venting requirements.
D. current Edition of American society of Mechanical Engineers AsME csD-1, “controls and safety

Devices for Automatically Fired Boilers”, for assembly and operations of controls and safety

devices.
E. All wiring on boilers installed in the usA shall be made in accordance with the National Electrical

code and/or Local Regulations.

cANADIAN BOILERs

A. current Edition of canadian standards Association csA B139, “Installation code for Oil Burning

Equipment”, for recommended Installation Practices.
B. The equipment shall be installed in accordance with the current Installation code for Gas Burning

Appliances and Equipment, csA B149, and applicable Provincial Regulations for the class; which

should be carefully followed in all cases.

Authorities having jurisdiction should be consulted before installations are made.

c. All wiring on boilers installed in canada shall be made in accordance with the canadian Electrical

code and/or Local Regulations.

The following defined terms are used throughout this manual to bring attention to the presence of hazards of

various risk levels or to important information concerning the life of the product.

Indicates an imminently hazardous situation

which, if not avoided, will result in death, serious

injury or substantial property damage.

Indicates a potentially hazardous situation which,

if not avoided, may result in moderate or minor

injury or property damage.

Indicates a potentially hazardous situation which,

if not avoided, could result in death, serious injury

or substantial property damage.

Indicates special instructions on installation,

operation, or maintenance which are important

but not related to personal injury hazards.

Hazard definitions