Brother HL-6050D Manuale Proprietario

TROUBLESHOOTING   6 - 2

Close the front cover of the printer.

Close the jam clear cover located behind the back output tray at the back of the printer.

Make sure that you use the correct driver, or add more memory. See Installing additional 
memory on page 4-12.

Carefully pull out the jammed paper from the indicated area as shown in Paper jams and 
how to clear them on page 6-5.

Put the same size of paper in the multi-purpose tray as is shown on the LCD. If the 
printer is 'paused', press Go.

Specify the correct type of media.

Add more memory. See Installing additional memory on page 4-12.

Put the duplex tray on the printer properly. See page 1-37. 

Put paper in the empty tray.

Put the paper tray in the printer.

Reduce the resolution or add the optional memory. See Installing additional memory on 
page 4-12. 
Set Page Protection to the correct size. See Device Options on page 2-5 and SETUP 
on page 3-16.

You can only use A4, Letter and Legal size for duplex printing. Check the printer driver 
setting and put the correct sized paper in the paper tray or multi-purpose tray that is 
selected in the printer driver. See What kind of paper can I use? on page 1-5.

Put the same size paper in the paper tray or multi-purpose tray that is selected in the 
printer driver. See What kind of paper can I use? on page 1-5.

Put the same size paper in the paper tray or multi-purpose tray that is selected in the 
printer driver, and then press Go. 

Delete unnecessary macros or fonts, or replace the CompactFlash

TM

 card or HDD with 

a new one. 

Take out the tray 1 from the printer and push it back in firmly.

Take out the tray 2 from the printer and push it back in firmly.

Replace the toner cartridge with a new one. 
See Replacing the toner cartridge on page 5-3.