LXE Home Security System E-EB-VX6UG-E Manuale Utente
U-Bracket Mount System
Components
Bottom Mounting Bracket
This bracket is mounted to the vehicle. The VX6 can be mounted to the bottom mounting
bracket. The UPS battery pack may be mounted to the bottom mounting bracket.
If the optional UPS battery pack is to be mounted to the bottom bracket, use the following parts
included with the UPS battery pack (not shown):
1” long aluminum spacer w/through hole (2 each)
1/4 flat washer (2 each)
1/4 locking washer (2 each)
screw, pan head, 1/4-20x2 (2 each)
bracket. The UPS battery pack may be mounted to the bottom mounting bracket.
If the optional UPS battery pack is to be mounted to the bottom bracket, use the following parts
included with the UPS battery pack (not shown):
1” long aluminum spacer w/through hole (2 each)
1/4 flat washer (2 each)
1/4 locking washer (2 each)
screw, pan head, 1/4-20x2 (2 each)
Back Bracket Assembly
1.
Rear Bracket
2.
Hardware:
1/4 flat washer (8 each)
1/4 locking washer (8 each)
1/4 flat washer (8 each)
1/4 locking washer (8 each)
1/4 flat washer (8 each)
The viewing angle can be adjusted through a wide range to provide the best viewing angle.
Torque Measurements
You will need a torquing tool capable of torquing to 50 inch pounds (5.64±.56 N/m).
Torque all screws and bolts according to the following table:
Torque all screws and bolts according to the following table:
For these screws and bolts…
Torque to
1/4 bolts
50.0±5 in/lb (5.64±.56 N/m)