LevelOne WBR-3460 Manuale Utente
Wireless ADSL2/2+ Modem Router User Guide
116
• Check the Wireless ADSL2/2+ Modem Router's status screen to
see if it is working correctly.
Problem 2:
Some applications do not run properly when using the Wireless
ADSL2/2+ Modem Router.
ADSL2/2+ Modem Router.
Solution 2:
The Wireless ADSL2/2+ Modem Router processes the data passing
through it, so it is not transparent.
through it, so it is not transparent.
For incoming connections, you must use the Virtual Server or Fire-
wall Rules to specify the PC which will receive the incoming traffic.
wall Rules to specify the PC which will receive the incoming traffic.
You can also use the DMZ function. This should work with almost
every application, but:
• It is a security risk, since the firewall is disabled.
• Only one (1) PC can use this feature.
every application, but:
• It is a security risk, since the firewall is disabled.
• Only one (1) PC can use this feature.
Wireless Access
Problem 1:
My PC can't locate the Wireless Access Point.
Solution 1:
Check the following.
• Your PC is set to Infrastructure Mode. (Access Points are always
• Your PC is set to Infrastructure Mode. (Access Points are always
in Infrastructure Mode)
• The SSID on your PC and the Wireless Access Point are the
same.
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup".
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup".
• Both your PC and the Wireless ADSL2/2+ Modem Router must
have the same setting for WEP. The default setting for the Wire-
less ADSL2/2+ Modem Router is disabled, so your wireless
station should also have WEP disabled.
less ADSL2/2+ Modem Router is disabled, so your wireless
station should also have WEP disabled.
• If WEP is enabled on the Wireless ADSL2/2+ Modem Router,
your PC must have WEP enabled, and the key must match.
• If the Wireless ADSL2/2+ Modem Router's Wireless screen is set
to Allow Trusted PCs only, then each of your Wireless stations
must have been designated as "Trusted", or the Wireless station
will be blocked.
must have been designated as "Trusted", or the Wireless station
will be blocked.
• To see if radio interference is causing a problem, see if connec-
tion is possible when close to the Wireless ADSL2/2+ Modem
Router.
Remember that the connection range can be as little as 100 feet
in poor environments.
Router.
Remember that the connection range can be as little as 100 feet
in poor environments.
Problem 2:
Wireless connection speed is very slow.
Solution 2:
The wireless system will connect at the highest possible speed,
depending on the distance and the environment. To obtain the high-
est possible connection speed, you can experiment with the
following:
• Wireless ADSL2/2+ Modem Router location.
depending on the distance and the environment. To obtain the high-
est possible connection speed, you can experiment with the
following:
• Wireless ADSL2/2+ Modem Router location.
Try adjusting the location and orientation of the Wireless
ADSL2/2+ Modem Router.
ADSL2/2+ Modem Router.
• Wireless
Channel
If interference is the problem, changing to another channel may