Leibherr USA Refrigerators and freezers for integrated use, door-on-door HRB 1110 HF 851 Manuale Utente

3.5 Re-attaching the soft stop

mechanism

Fig. 4

Screw the ball stud

Fig. 4 (3)

into the new fastening hole.

Slide the tension spring

Fig. 1 (11)

inwards again.

Screw the retainer

Fig. 4 (1)

on.

Attach the soft stop mechanism

Fig. 4 (2)

onto the ball

stud.

4 Kitchen cabinet setup

This is a built-in appliance and is therefore completely

enclosed by a kitchen cabinet. The kitchen cabinet

surrounding the appliance must be set up exactly in

accordance with the specified fitting dimensions and must

allow sufficient air circulation to ensure correct operation of

the appliance.

With side-by-side configurations,

provide a separate kitchen cabinet

for each appliance.

If possible, have a professional install the appliance in your

kitchen cabinet unit.
The wall of the adjacent cabinet must be at least

5/8 '' (16 mm) thick.

4.1 Air circulation in the kitchen

cabinet

Fig. 5

- An effective ventilation cross-section of at least 31 in

(200 cm

) must be present at the air intake

Fig. 5 (1)

and

air outlet

Fig. 5 (2)

- The upper ventilation cross-section can be set up directly

above the appliance

Fig. 5 (2)

, near the ceiling above a

cabinet

Fig. 5 (3)

, or as an air vent in an intermediate

ceiling

Fig. 5 (4)

Kitchen cabinet setup