Lanner electronic FW-7890 Manuale Utente

 

Memory Hole At 15M-16M: You can reserve this area of system memory for ISA adapter 

ROM. When this area is reserved, it cannot be cached. The user information of peripherals 
that need to use this area of system memory usually discusses their memory requirements. 

Delay Prior to Thermal  : The Delay Prior To Thermal BIOS feature controls the activation 

of the Thermal Monitor's automatic mode. It allows you to determine when the Thermal 
Monitor should be activated in automatic mode after the system boots. 

If you are using the Non-ECC DRAM, the mode will show "Non-ECC" and this function 
is disabled. 

Set DRAM mode at ECC. 

Set DRAM mode at Non-ECC. 

PCI Express A / B / C Device : Select the PCI Express interface. 

Memory RAS Feature: A memory function; an acronym for Raw Address Select.  A  

control pin on a DRAM used to latch and activate a row address. The row selected on a 
DRAM is determined by the data present at the addr. pins  when RAS becomes active. 

 

        

 

Init Display First : This item allows you to decide to active whether PCI Slot of VGA card 

or AGP first.  The settings are “PCI Slot” and “AGP Slot”.

OnChip IDE Device : Scroll to this item and press <Enter> to view the following screen: