Lanner electronic FW-7890 Manuale Utente

 

        

On-Chip (Primary/Secondary) PCI IDE : The Intel 82C440BX chipset 

contains a PCI IDE interface with support for two IDE channels. Select Enabled to 
activate the primary and/or secondary IDE interface. Select Disabled to deactivate 
this interface, if you install a primary and/or secondary add-in IDE interface. 

On-Chip Serial ATA 
This item allows you to configure your serial ATA devices if present. 

Disable SATA controller. 

Auto arrange by BIOS. 

PATA and SATA are combined. Max.of 2 IDE drives in each 

channel. 

Enabled both SATA and PATA. Max.of 6 IDE drives are 

supported. 

SATA is operating in legacy mode. 

         Note. The items SATA mode, Serial ATA Port0 Mode, and Serial ATA Port1 

Mode are configurable only when the ON-Chip Serial ATA item is not set to 
[Disabled]. 

Remap SATA Port 0 to IDE Pri. Master. 

Remap SATA Port 0 to IDE Pri. Slave. 

Remap SATA Port 0 to IDE Sec. Master.

Remap SATA Port 0 to IDE Sec. Slave. 

Remap SATA port 0 to P-SATA Master.

Remap SATA port 0 to S-SATA Master.

 

Onboard Device : Scroll to this item and press <Enter> to view the following screen: 

USB Controller: Select Enabled if your system contains a Universal Serial Bus 
(USB) controller and you have USB peripherals 

 

USB 2.0 Controller 
Disable this function if you are not using onboard USB 2.0 feature. 

Enable USB 2.0 Controller. 

Disable USB 2.0 Controller. 

 

USB Keyboard Support : Select Enabled if your system contains a Universal 

Serial Bus (USB) controller and you have a USB keyboard.