Crossover WHWF09810NM Istruzione Sull'Installazione
5. Support the soap dispenser housing and firmly
push the 3 elbow fittings from the kit into the
drilled holes, until they are fully inserted. (Fig. 2).
Note that although the fittings can move freely in
the holes, they will lock in place, and cannot be
removed with reasonable force.
drilled holes, until they are fully inserted. (Fig. 2).
Note that although the fittings can move freely in
the holes, they will lock in place, and cannot be
removed with reasonable force.
6. Drill a 1/8” pilot hole through the corresponding number of chemical-tube entry holes on the
back of the machine (Fig 3).
7. Using an appropriate bit, enlarge the holes drilled in step 6, to allow the chemical supply
tubing to easily enter the machine (Fig 3)..
8. Push chemical supply hoses through the drilled holes and connect them to the exposed
ends of the barbed “L” fittings on the detergent dispenser. Secure them with clamps or
cable ties (Fig. 4 & 5).
cable ties (Fig. 4 & 5).
Fig. 2
Fig. 3
Fig. 4
Fig. 5