Crossover WHWF09810NM Istruzione Sull'Installazione
13. Follow the pump manufacturer’s instructions to complete installation of the pump, using the
leads in the trigger signal harness from the machine as follows:
RED wire: PREWASH SIGNAL
BLACK wire: MAINWASH SIGNAL
BROWN wire: THIRD RINSE SIGNAL
BLUE wires: COMMONS
BLACK wire: MAINWASH SIGNAL
BROWN wire: THIRD RINSE SIGNAL
BLUE wires: COMMONS
14.
When pump installation has been completed, restore power to the washer and use the
Service Mode to prime the chemical pumps. Check for leaks, and flush the detergent
dispenser to remove any residual chemicals.
Service Mode to prime the chemical pumps. Check for leaks, and flush the detergent
dispenser to remove any residual chemicals.
15.
Replace top panel and return the machine to service.