Marvel 61WCMBSGLL Guida Introduttiva
Start Your Appliance
To start your appliance, plug it into a power supply. The
unit should start automatically as the factory default should
be on. If the unit does not start, push and hold the “ON/
OFF” button located on the display panel for three seconds
(see Figure 3).
To start your appliance, plug it into a power supply. The
unit should start automatically as the factory default should
be on. If the unit does not start, push and hold the “ON/
OFF” button located on the display panel for three seconds
(see Figure 3).
Once the bottles are loaded, allow at least 48 hours for
the unit to stabilize before making any adjustments to the
initial setting.
the unit to stabilize before making any adjustments to the
initial setting.
Set the Controls
The available temperature range of the unit is from 40 to
65 degrees F. The middle range on the control is approxi-
mately 55 degrees F. The temperature can be lowered or
raised by first pushing and holding the “SET” button for
one second on the display pad. You will enter Temperature
SET MODE. Pushing either the “WARMER” or “COLDER”
key while holding the “SET” key will raise or lower the set
temperature by one degree F. Releasing the “SET” key exits
SET MODE. As with any refrigeration product, there is a
slight temperature variance at different locations within the
cabinet.
The available temperature range of the unit is from 40 to
65 degrees F. The middle range on the control is approxi-
mately 55 degrees F. The temperature can be lowered or
raised by first pushing and holding the “SET” button for
one second on the display pad. You will enter Temperature
SET MODE. Pushing either the “WARMER” or “COLDER”
key while holding the “SET” key will raise or lower the set
temperature by one degree F. Releasing the “SET” key exits
SET MODE. As with any refrigeration product, there is a
slight temperature variance at different locations within the
cabinet.
Adjustable Temperature Control
The temperature control is fully adjustable from the low
forties to the mid sixties. The range allows flexibility of
temperature preferences and provides the ideal wine aging
and storing temperatures.
The temperature control is fully adjustable from the low
forties to the mid sixties. The range allows flexibility of
temperature preferences and provides the ideal wine aging
and storing temperatures.
Interior Light and Switch
The interior light makes it easy to view your wine labels
and enhances the display of your collection. To engage the
display light feature, press the round light switch. It is lo-
cated on the left side of the user panel. The light will come
on and stay on with the door closed until the light switch is
pressed again. The light will also come on when the door
is opened.
The interior light makes it easy to view your wine labels
and enhances the display of your collection. To engage the
display light feature, press the round light switch. It is lo-
cated on the left side of the user panel. The light will come
on and stay on with the door closed until the light switch is
pressed again. The light will also come on when the door
is opened.
Information/Lockout Key
Each momentary press of the “SET” key activates the Infor-
mation and Lockout selection menu. Additional presses
sequentially scroll through the Information selection menu
and allow the enabling and disabling of the Lockout fea-
ture.
Each momentary press of the “SET” key activates the Infor-
mation and Lockout selection menu. Additional presses
sequentially scroll through the Information selection menu
and allow the enabling and disabling of the Lockout fea-
ture.
Information Selection Menu
•
Current Interior Temperature (tI): Press and hold the
1.
“SET” key to display the current interior temperature.
Maximum Stored Temperature (thi): Press and hold the
Maximum Stored Temperature (thi): Press and hold the
2.
“SET” key to display the maximum temperature stored.
The control automatically reads and stores the inte-
rior temperature every five minutes. The data can be
cleared by pressing “SET” and “ON/OFF” simultane-
ously while the value is displayed.
Minimum Stored Temperature (tLO): Press and hold the
The control automatically reads and stores the inte-
rior temperature every five minutes. The data can be
cleared by pressing “SET” and “ON/OFF” simultane-
ously while the value is displayed.
Minimum Stored Temperature (tLO): Press and hold the
3.
“SET” key to display the minimum temperature stored.
The control automatically reads and stores the inte-
rior temperature every five minutes. The data can be
cleared by pressing “SET” and “ON/OFF” simultane-
ously while the value is displayed.
Total Operating Time of the Condenser Since the Last
The control automatically reads and stores the inte-
rior temperature every five minutes. The data can be
cleared by pressing “SET” and “ON/OFF” simultane-
ously while the value is displayed.
Total Operating Time of the Condenser Since the Last
4.
Cleaning (cnd): Press and hold the “SET” key to display
the total operating hours of the compressor since the
last cleaning. The control stores the total operating
hours of the compressor to determine the volume of
air that has moved across the condenser coils. This
number is displayed in weeks. A reminder is displayed
when a cleaning is recommended (see Alarm Codes).
The recommended cleaning period is the equivalent of
one year of air volume. The data can be cleared by
pressing the “SET” and “ON/OFF” keys simultaneously
while the value is displayed.
the total operating hours of the compressor since the
last cleaning. The control stores the total operating
hours of the compressor to determine the volume of
air that has moved across the condenser coils. This
number is displayed in weeks. A reminder is displayed
when a cleaning is recommended (see Alarm Codes).
The recommended cleaning period is the equivalent of
one year of air volume. The data can be cleared by
pressing the “SET” and “ON/OFF” keys simultaneously
while the value is displayed.
Figure 3
OPERATION
3
Set
Colder
Warmer
ON/OFF
F
Door Switch
Light Switch
Control
Alarm
Press and Hold
Press and Hold