Marvel 61WCMBSGLL Guida Introduttiva
Insert Wine Bottles
The four pull-out shelves each hold eight bottles. See Fig-
ure 4 for typical wine bottle spacing. Tall bottles should not
be loaded on the bottom rack because they may prevent
the door from closing. The display shelf at the top of the
cabinet holds seven bottles. Also, there is a fixed, wooden,
bottle cradle in the bottom, step section of the cabinet. Six
bottles of wine may be stored there.
The four pull-out shelves each hold eight bottles. See Fig-
ure 4 for typical wine bottle spacing. Tall bottles should not
be loaded on the bottom rack because they may prevent
the door from closing. The display shelf at the top of the
cabinet holds seven bottles. Also, there is a fixed, wooden,
bottle cradle in the bottom, step section of the cabinet. Six
bottles of wine may be stored there.
Loading Tips and Suggestions
Bottom rack(s) may be removed for storing “jug” wines.
You may store magnums and other large bottles on any
of the racks (except for the top rack) by removing the rack
directly above them. Position white wines on the middle or
lower racks and red wines on the upper racks (see Figure
5).
Bottom rack(s) may be removed for storing “jug” wines.
You may store magnums and other large bottles on any
of the racks (except for the top rack) by removing the rack
directly above them. Position white wines on the middle or
lower racks and red wines on the upper racks (see Figure
5).
The bottles on the top rack directly under the light will be
exposed to a slightly higher temperature when the light is
on. Position your wines accordingly and REMEMBER TO
TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.
exposed to a slightly higher temperature when the light is
on. Position your wines accordingly and REMEMBER TO
TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.
Keep wines that you plan to use for everyday drinking and
entertaining on the front half of the racks where labels are
completely visible. Place wines for aging or longer term
storing in the rear.
entertaining on the front half of the racks where labels are
completely visible. Place wines for aging or longer term
storing in the rear.
Pull-out Racks
The four pull-out wine racks may be pulled out ap-
proximately seven and a half inches to facilitate adding or
removing bottles. DO NOT lean on or press down heavily
on the wine shelves. Doing so may damage the shelves
and the wine bottles stored on them. Pull the wine racks
out gently and carefully to minimize unsettling your wine
collection. AVOID pulling out more than one rack at any
time to maintain stability.
The four pull-out wine racks may be pulled out ap-
proximately seven and a half inches to facilitate adding or
removing bottles. DO NOT lean on or press down heavily
on the wine shelves. Doing so may damage the shelves
and the wine bottles stored on them. Pull the wine racks
out gently and carefully to minimize unsettling your wine
collection. AVOID pulling out more than one rack at any
time to maintain stability.
Single Bottle Racks
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles (see Figure 6).
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles (see Figure 6).
APPLIANCE FEATURES
5
Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 4
Figure 5
Figure 6