Thermador PH54GS Istruzione Sull'Installazione
English 1
Introduction
This manual provides the proper installation instructions for
two styles of THERMADOR PROFESSIONAL
®
Series Wall
Hoods:
•
27” Pro Wall Hood models (PHxxGS), 27” (686mm) in
depth, with widths of 36” (914mm), 42” (1067mm), 48”
(1219mm), and 54” (1372mm). This model series
features brushed stainless-steel canopy with halogen
lamps and heat lamps (see Figure 1).
depth, with widths of 36” (914mm), 42” (1067mm), 48”
(1219mm), and 54” (1372mm). This model series
features brushed stainless-steel canopy with halogen
lamps and heat lamps (see Figure 1).
•
24” Pro Wall Hood models (PHxxHS), 24” (610mm) in
depth, with widths of 30” (762mm), 36” (914mm), and
48” (1219mm). This model series features brushed
stainless-steel canopy with halogen lamps (see
Figure 1).
depth, with widths of 30” (762mm), 36” (914mm), and
48” (1219mm). This model series features brushed
stainless-steel canopy with halogen lamps (see
Figure 1).
All hoods require the choice of a Remote, Inline, or Integral
Blower. Use only THERMADOR
®
blowers with
THERMADOR
®
ventilation hoods. All blower models are
sold separately. See Table 1, Blower & Circuit Breaker
Ratings, for recommended blowers. Contact Customer
Service for additional options.
Ratings, for recommended blowers. Contact Customer
Service for additional options.
All Hood models are rated for 120 VAC, see Table 1, for
circuit breaker ratings.
circuit breaker ratings.
Figure 1: Pro 24” & 27” Wall Hoods
30”, 36”, 42”, 48”, 54”
(762, 914, 1067, 129, 1372mm)
18”
(457
mm)
24”, 27”
(61mm, 686mm)
12”
(305
mm
)
B
LOWER
SKU
CFM
V
OLTAGE
(AC)
B
LOWER
C
URRENT
(AMPS)
C
IRCUIT
B
REAKER
(AMPS)
R
EMOTE
B
LOWER
600 CFM
VTR630D
600
120
4.2
15
R
EMOTE
B
LOWER
1000 CFM
VTR1030D
1000
120
5.7
15
R
EMOTE
B
LOWER
1300 CFM
VTR1330E
1300
120
8.5
20* / 15**
I
NLINE
B
LOWER
600 CFM
VTI610D
600
120
4.2
15
I
NLINE
B
LOWER
1000 CFM
VTI1010D
1000
120
5.7
15
I
NTEGRAL
B
LOWER
600 CFM
VTN630C
600
120
2.7
15
I
NTEGRAL
B
LOWER
1000 CFM
VTN1030C
1000
120
5.4
15
Table 1: Blower & Circuit Breaker Ratings
* 20 Amp circuit breaker required when using the VTR1330E Remote Blower with a 27” Pro Wall Hood.
** 15 Amp circuit breaker required when using the VTR1330E Remote Blower with a 24” Pro Wall Hood.
** 15 Amp circuit breaker required when using the VTR1330E Remote Blower with a 24” Pro Wall Hood.
When connected to a GFCI-protected supply, the Pro Hoods are suitable for use in damp locations that are protected from
outside weather conditions and not subject to saturation with water and other liquids, but can be subject to moderate
degrees of moisture. Refer to local codes, NEC/CEC, and or the Authority Having Jurisdiction (AHJ) for additional
information.
outside weather conditions and not subject to saturation with water and other liquids, but can be subject to moderate
degrees of moisture. Refer to local codes, NEC/CEC, and or the Authority Having Jurisdiction (AHJ) for additional
information.