Traeger BBQ40002 Manuale

 
Note: This is a two person task. Do NOT attempt to assemble the 
cold smoker without the help of another person! 
 
  1) Unbolt the smokestack from your barbecue  
  2) Insert washers onto the 2-¼” bolts, then place the bolts through          
       the left hand side of the smoker unit. 
  3) Slide the gasket over the two bolt ends. 
  4) Carefully pick up the cold smoker unit and insert the 2-¼” bolts 
       through the outside bolt holes of the smoker body. 
  5) Place a washer on the bolt end before installing and tightening 
       the nuts onto the bolts. 
  6) Install the bolt in the center hole of both barrel ends. 
  7) Re-attach the smokestack on the outside of the cold smoker unit. 
  8) Install the Dome Thermometer on the right hand side of the cold  
      Smoker as indicated by the illustration. 
  9) Install handle on the cold smoker door. 
10) Place the two grills inside the cold smoker. 
11) You are ready to cold smoke!